News

Like many other devices, diesel generators are also affected by environmental changes. Although we often regard machines as unprocessed objects that are not affected by environmental changes, this ...

Overload protection When the generator is overloaded, the system will automatically send a signal and stop power supply.When the lack of phase protection When any phase of the three -phase AC power...

1. Check the machine heat dissipation system, cooling liquid level. 2. Check the oil and measure the oil scale of the oil with the ulnoma, which is the best in the scale line. 3. Check whether th...

The most common problem in the low oil level is that there is not enough oil in the engine. The oil level may only be lower than the oil pump supply tube. In short, this will cause the oil pump to ...

If the diesel generator is idle for a long time, it cannot expect it to keep the same quality when leaving the manufacturing workshop for the first time.

1. Insufficient cooling water, the temperature of the temperature is failed.
2. The pump is damaged or the teleportation belt slits causes the pump to work poorly.

As a result, there are many reasons for vibrating the unit and the pump building building. There are both connections and interaction between some factors. In summary, there are mainly the followin...

The inverter welding machine is mainly a inverter arc welding power generated by the inverter, also known as the arc welding inverter. It is a new type of welding power supply.

Diesel generators are commonly used in electricity used in households, industries or other enterprises. As a substitute for power supply power, when the power supply is insufficient or in areas whe...

After the diesel engine is started, it is necessary to observe whether the oil pressure can be normal and abnormal.

Three leaks are the abbreviation of oil, leakage, and air leakage of diesel engines. The harmfulness of the three leaks of diesel engines is very harmful: first, it increases oil consumption, waste...

The reasons for non -power generation include the incomplete engine oil roads, the abnormal compression of the cylinder, and the large consistency of the lubricating oil.