The Reason Why Diesel Generators Do Not Generate Electricity

The reasons for non -power generation include the incomplete engine oil roads, the abnormal compression of the cylinder, and the large consistency of the lubricating oil.
1. First turn off the ignition switch to check whether the connection cable of each part of the power system is deviated, whether the fuse is burned, and the tension of the fan belt. Then turn on the ignition switch to check whether the lid of the back end of the motor is attractive. Start the engine. The current shows the non -charging or the charging light is often on the motor or regulator. Or a regulator.
2. The generator does not run according to the limited technical conditions. For example, if the stator voltage is high, the iron loss increases, the load current is too large, the loss of copper of the stator winding increases; The heat dissipation, the force factor is too low, increase the incentive current of the rotor, affect the heat of the rotor; the detection and monitoring instrument indicates whether it is normal, if it is not normal, perform the necessary adjustment and processing, and run according to the technical conditions of the generator.
3. If the total amount of the three -phase current difference current is 10%, that is, the phase current is severely imbalanced, resulting in a retrofit magnetic field with an imbalance of three -phase current. To maintain the balance of phase current, make maximum efforts.