Operation and maintenance of diesel pump pumps

Before using the diesel pump, necessary inspections and preparations must be performed. First, check whether the fuel in the fuel tank is sufficient and ensure that the quality of the fuel meets the requirements. Secondly, check whether the oil of the pump is sufficient and ensure that the quality of the oil meets the requirements. Finally, check whether the wires and control systems work normally. If any problems or abnormalities are found, it should be excluded in time.
When operating the diesel pump, the operating procedures and precautions in the operating manual must be strictly abide by the operating manual. Especially when starting and stopping the pump, it is necessary to operate in accordance with the prescribed procedures, and pay attention to observing the operating status and changes in the indicator light. During use, it should be cleaned and replaced in a timely manner to replace vulnerable parts such as filters, seals and bearing to ensure the normal operation of the pump and extend its service life.